EMG Angstadt 7.5" UDP-9 PCC Airsoft AEG Rifle w/ Battery & Charger, Black
EMG
- SKU:
- EVK-119097
- UPC:
- 859181190976
- Shipping:
- Calculated at Checkout
Why buy from Airsoft Station?
-
FREE SHIPPINGOn purchases over $199
(lower 48 states) -
Returns & WarrantyReturns & Warranty Policy
for 30 days -
RAVE reviewsRated 4.6/5 by 35,000+
Happy Customers
The UDP-9 cuts out the bulk of a standard airsoft rifle, giving you a 9mm-style PCC that thrives in high-speed, indoor environments. It’s an officially licensed Angstadt Arms replica, featuring a real-deal metal receiver and authentic trademarks in a package that weighs only 2080g. The PDW-style stock allows for a super-short 585mm profile, but can telescope out to 685mm when you need to brace for a longer shot.
Inside, the micro-switch trigger and 11.1v-ready Deans wiring provide a crisp, lag-free response that’s built for fast-paced semi-auto fire. It clocks in at 330–350 FPS, the goldilocks zone for indoor play where you need performance without exceeding field safety limits. Despite the short 190mm inner barrel, the precision hop-up delivers the kind of consistency you need for tight groupings at a distance.
This UDP-9 bundle includes the rifle, a 90-round mid-cap, and a battery and charger to get you on the field immediately. Because it shares a magazine platform with Classic Army and EMG PCCs, you have plenty of aftermarket options for spares. The 14mm CCW threads make it a 30-second job to swap the flash hider for a tracer unit or suppressor. If you're looking for a reliable, all-in-one PCC that carries the Angstadt Arms pedigree, this package is a massive value.
Note: Accessories NOT included. This comes with a federally mandated blaze orange tip.
Features:
- Licensed Angstadt Arms replica
- LiPo-ready gearbox with micro-switch trigger
- Integrated MOSFET for enhanced power and response
- Custom PCC polymer upper and lower receivers
- Lightweight free-float M-LOK polymer handguard
- Battery-friendly adjustable crane-style stock
- Semi-auto, full-auto, and safety firing modes
- Battery and charger included
|
WARNING! Read all instructions before using or charging Li-PO Batteries! Due to their high volatility, lithium polymer (Li-Po) batteries must be handled with caution. Failure to follow the directions below can result in fire, property damage, personal injury, or even death. |
|
|
|
1. Adult supervision is always required during the charging of a Li-Po battery. Never leave a charging battery unattended, and ensure it is unplugged within an hour once the charging process is complete. |
|
2. Charge your Li-Po batteries away from anything flammable. Use a lipo-safe bag. Unplug the charger immediately if the battery swells. Charge only in the recommended temperature range of 40-90F (5-32C). |
|
3. Do not use a NiMH/NiCd charger or any unauthorized equipment to charge a Li-Po battery; use only chargers made for charing airsoft Li-Po batteries. When using advanced chargers, adhere strictly to the guidelines outlined in the instruction manual. |
|
4. Before use or charging, thoroughly inspect all Li-Po batteries. Promptly dispose of visually damaged, deformed, rusted, wet, hot, or expired (over 3 years since first use) Li-Po batteries. |
|
5. Used batteries contain valuable resources that can be reused and recovered through proper recycling. By recycling them correctly, you help preserve resources and safeguard the environment. To dispose of batteries properly, wrap them in a bag and take them to a local waste facility that accepts batteries. Never dispose of batteries in fire, water, or household waste. |
|
6. Store this battery and/or charger out of reach of children and minors. It is sold specifically for Airsoft use. Do not modify, alter, or use it for any other purpose for which it is not intended. |
|
7. Charge your Li-Po battery at least once every 6 months and store it fully charged to prevent over-discharge. Store it in a flame-resistant, non-pressurized, low-humidity container away from sunlight. |
|
8. Always disconnect the battery from the Airsoft gun when charging and when not in use. Never discharge Li-Po battery packs with a discharger. If you notice the motor slowing down, cease use immediately. Over-discharging can lead to fire hazards. |
|
9. If a Li-Po battery is damaged or bent, disconnect it from the device immediately. Exercise caution as cells may be hot. Place the battery pack in a fire-safe area and monitor it for 30 minutes for any abnormalities before disposing of it properly with caution and care. |
