GATE TITAN Drop-In MOSFET Trigger Unit - Rear Wired Version

GATE TITAN Drop-In MOSFET Trigger Unit - Rear Wired Version

SKU:
9365-TI-DIM-RW
Shipping:
Calculated at Checkout
$105.95
Add To Cart

Why buy from Airsoft Station?

  • FREE SHIPPINGOn purchases over $199
    (lower 48 states)
  • Returns & WarrantyReturns & Warranty Policy
    for 30 days
  • RAVE reviewsRated 4.6/5 by 35,000+
    Happy Customers

GATE TITAN Drop-In MOSFET Kit - Rear Wired

If you want the absolute best AEG MOSFET on the market the GATE TITAN is the only choice. It's wide array of features and programming functions makes this the most versatile AEG tuning tool in the industry. The TITAN has the ability to adjust trigger sensitivity, pre-cocking, fire selector modes including burst fire and semi-auto only, rate of fire, low battery warning and protection, and lock-out sniper delay. Additonal GATE TITAN Programming Cards & USB-Link add-on accessories allow for setup and programming of all of the TITAN's features as well.

The benefits of the GATE TITAN System include:

    • Easy drop-in installation with step by step install guides and videos
    • LiPO-Readiness and Protection (up to 14.8v 5000mAh, 60C LiPO Batteries)
    • Smart Fuse Technology Protects the MOSFET, motor, and gears
    • Low-Battery Protection
    • Customization Enthusiast friendly via Programming Card and USB-Link
    • Firmware Updates available online
    • Compatible with Single and Dual Sector Gears
    • Compatible with nearly all Version 2 Gearboxes

Gate TITAN Drop-In Trigger Module

The heart and soul of the GATE MOSFET System, the TITAN drop-in trigger module replaces the standard trigger and wiring harness as well as the mechanical cutoff lever with a high tech electronic version. GATE replaces all the mechanical switches that went faulty on other competitor's mosfets and uses optical sensors thus eliminating mechanical stress transferred from pulling the trigger to the PCB. This MOSFET has 8 optical sensors: 1 for the sector gear, 2 for the selector switch, and a total of 5 for the trigger! When used along with the required TITAN Tactical Programming Card or USB-Link (Products sold separately), this unit is able to control the following features and functions:

    • Pre-Cocking & Boost
    • Burst Firing Modes
    • 6 Different Dire Selector Modes
    • Trigger Sensitivity
    • Rate of Fire Control
    • Battery Protection for LiPO and LiFE type batteries
    • Low Battery Warning Modes
    • Rate of Fire Stabilization

This package includes:

Please note: To utilize this product, it is REQUIRED to have either the TITAN Tactical Programming Card OR USB-Link to properly set up the product.

More features and videos can be found in the Product Videos info tab

 

 

Manufacturer:
GATE
30 Day Return & Warranty 1 Year Manufacturer's Warranty (http://gatee.eu/technical-support/warranty)

Videos Hide Videos Show Videos

Related Products

Customer Reviews

5
Out of 5.0
A graph showing this site's review totals.
Overall Rating
100%
of customers that buy
from this merchant give
them a 4 or 5-Star rating.
Perfect upgrade to any V2 gearbox
October 19, 2017 by Robert K.
“This will be my 10th TITAN. They are truly that good. I have 12, soon to be 13 AEGs and the only exception for those not having them are that one is an AK and the other uses a Spectre MKII. I actually like these better than Spectre MKIIs. TITANs have better fault protection and error reporting. Just plug it into the USB serial dongle and use the software to pull up a report. Not only does it tell you whats wrong, it tells you how to fix it. The Spectre, when encountering a jam, just kept pushing the motor until the teeth on the spur gear stripped. The TITAN immediately stopped and then buzzed the motor to indicate a fault. I have installed these in ICS split (new style and old style), G&P, VFC, and Retro Arms gearbox shells. The trigger sensor tuning combined with pre-cocking can give you near HPA trigger response. I won't build personal version 2 guns without a TITAN for my personal use anymore.”
Nice product
August 22, 2017 by J D.
“This is an overall nice product. the only issue i have with this product is that you will have to be real careful with the wiring, as there are two wires going around the pinion gear. i used super glue to keep it stay tight with the gearbox shell so the pinion gear won't hit the wires.

Gearbox used: Retro Arms 8mm CNC QCS shell.
no modification needed.

also tested on G&P v2 gearbox, no modification needed as well.”

!