Raptors Airsoft 11.1v 6000mAh 10C Nunchuck Type Li-Ion Battery, Deans
Raptors Airsoft
- SKU:
- TMB-RTQ-6000-11V-10C-N-TP
- UPC:
- 759195037505
- Shipping:
- Calculated at Checkout
Oakdale, MN 55128
Maplewood, MN 55109
For players who need maximum power density, this 11.1V 6000mAh Li-Ion battery offers double the capacity of standard packs in a versatile nunchuck form factor. This high-capacity design is a game-changer for support gunners (LMGs) and endurance players who need to stay on the firing line for an entire event without swapping batteries.
The 11.1V output provides a snappy trigger response and a high rate of fire, while the 10C discharge rate ensures a stable and safe power draw for your motor. The split-cell nunchuck design is shaped for compatibility with crane stocks, allowing for a clean fit despite the massive increase in capacity. To ensure maximum efficiency, it comes with a high-quality Deans (T-Plug) to minimize resistance and keep your setup running cool under high-stress use. If you prioritize long-term reliability and high-volume shooting, this 6000mAh unit is the ultimate one-and-done power solution.
Features:
- 20mm x 135mm
- 11.1V High-voltage output
- 6000mAh Ultra-high capacity
- Advanced Li-Ion chemistry
- Efficient Deans connector
- 10C Stable discharge
- Versatile nunchuck configuration
|
WARNING! Read all instructions before using or charging Li-PO Batteries! Due to their high volatility, lithium polymer (Li-Po) batteries must be handled with caution. Failure to follow the directions below can result in fire, property damage, personal injury, or even death. |
|
|
|
1. Adult supervision is always required during the charging of a Li-Po battery. Never leave a charging battery unattended, and ensure it is unplugged within an hour once the charging process is complete. |
|
2. Charge your Li-Po batteries away from anything flammable. Use a lipo-safe bag. Unplug the charger immediately if the battery swells. Charge only in the recommended temperature range of 40-90F (5-32C). |
|
3. Do not use a NiMH/NiCd charger or any unauthorized equipment to charge a Li-Po battery; use only chargers made for charing airsoft Li-Po batteries. When using advanced chargers, adhere strictly to the guidelines outlined in the instruction manual. |
|
4. Before use or charging, thoroughly inspect all Li-Po batteries. Promptly dispose of visually damaged, deformed, rusted, wet, hot, or expired (over 3 years since first use) Li-Po batteries. |
|
5. Used batteries contain valuable resources that can be reused and recovered through proper recycling. By recycling them correctly, you help preserve resources and safeguard the environment. To dispose of batteries properly, wrap them in a bag and take them to a local waste facility that accepts batteries. Never dispose of batteries in fire, water, or household waste. |
|
6. Store this battery and/or charger out of reach of children and minors. It is sold specifically for Airsoft use. Do not modify, alter, or use it for any other purpose for which it is not intended. |
|
7. Charge your Li-Po battery at least once every 6 months and store it fully charged to prevent over-discharge. Store it in a flame-resistant, non-pressurized, low-humidity container away from sunlight. |
|
8. Always disconnect the battery from the Airsoft gun when charging and when not in use. Never discharge Li-Po battery packs with a discharger. If you notice the motor slowing down, cease use immediately. Over-discharging can lead to fire hazards. |
|
9. If a Li-Po battery is damaged or bent, disconnect it from the device immediately. Exercise caution as cells may be hot. Place the battery pack in a fire-safe area and monitor it for 30 minutes for any abnormalities before disposing of it properly with caution and care. |
