Code 11 AXON Pro Twin Wire Switch, Tan

Your light and laser are in your hands, but you need your hands on the rifle. The AXON Pro Twin solves that by mounting directly to the rail and giving you control of both devices from a single switch. Front button is constant on/off for both devices. Rear button is momentary — hold to activate both, release and they're off. Both buttons drive both devices simultaneously, so you don't need separate controls when you're engaging.

What it connects to. The switch uses Code 11's universal adapter system. In the box you'll find 2.5mm, Crane, and SF adapter connectors — that covers the most common weapon lights and PEQ-style laser/IR units. The twin wiring lets you run a light on one cable and a laser on the other. If your devices don't use one of the included adapters, Code 11's adapter ecosystem is deep enough that you can likely find what you need separately.

Mounting. Comes with both a Picatinny rail clamp and an M-LOK bracket, plus the screws, nuts, and a hex key. Mount it where your thumb naturally falls — too far forward and you're fishing for it, too far back and it gets in the way during reloads. The nylon body keeps weight to about 2.4 oz, so it won't throw off your balance.

A note before you buy. This is a control switch and mount — it does not include a light or laser unit. Those are purchased separately. Double-check that your light and laser take one of the included adapter styles or a Code 11-compatible adapter before ordering. Also, weapon lights and lasers draw from their own batteries, so make sure you have spares.