Code 11 AXON Pro Single Wire Switch, Tan

A flashlight and a PEQ-style laser on a rail means two cables running back to your grip, fighting for space behind the trigger guard. The AXON Pro cuts that in half. One cable. One switch. Two buttons that give you both constant-on and momentary from the same grip position.

How it works. The front button is a standard toggle: press once for constant on, press again to turn off. The rear button is momentary: hold it down while you need the device active, release and it cuts. That's how you get a flashlight that stays on through a room and a laser that only appears when you're actually aiming, without juggling two separate switches.

What's in the bag. Along with the switch itself you get four sets of adapter connectors: 2.5mm, Crane Laser, SF pattern, and additional adapters so you're not limited to a single device type. Both a Picatinny rail mount and an M-LOK bracket are included, plus mounting hardware and a hex key. Pick whichever rail your platform has and you're set.

Mounting. The nylon body is a fraction of a pound, so the switch itself won't shift your balance. The mount sits forward of the dust cover and behind the forward grip area, putting the buttons in normal finger position for a two-handed grip. Make sure you pick the adapter that matches your device's plug — the included set covers the most common PEQ-style connectors, but if you're running something with a proprietary cable, check it first.

Includes a 30-day return and warranty from Code 11.